+
  • 画板 1 拷贝 4(4).png
  • 画板 1 拷贝(4).png
  • 画板 1 拷贝 5(3).png

Grooving production line TWG-14


This is a grooving production line for pipe mills to make piping prefabrication. It is designed for 8inch to 24inch pipe, It is a good production line for big pipe processing.


Correo electrónico:

Palabra clave:

grooving production line

piping prefabrication

Descripción del producto

  PRODUCT INTRODUCTION  

 

● This is a grooving production line for pipe mills to make piping prefabrication.
● It is designed for pipe with big diameter up to 24inch
● Equipped with magnetic grid ruler, make the groove more accurate.
● PLC control system, make the operation more convenient. 

 

TWG-14 grooving production line

 

  PRODUCT SPECIFICATIONS  

 

Max. pipe O.D: DN600mm

 Min. pipe O.D: DN200mm

Max. wall thickness: 12.7mm

 Pipe length: 6-12m

 Oil pump motor: three phase、380V、15KW

 Tank volume: 380L

 Flux-adjustment range: 1-125L/min

 Pressure-adjustment range: 14-210kgf/cm2

 Transmission wheel motor speed: Adjustable

● Transmission wheel motor: Three phase 、380V、1.5KW

● Max. oil pump pressure: 11Mpa

● Main shaft motor: 380V、3000W、50HZ

● Main shaft speed: 0~45rpm/min

 

  PRODUCTION VIDEO  

 

Following is the video of the TWG-14A grooving production line working in the pipe prefabrication factory. 

 

 

Página anterior

Página siguiente

Página anterior

Página siguiente

PRODUCTOS RELACIONADOS

8 units grooving production line TWXL3-10A

Batch grooving of 3-8 inch pipes

6 units grooving production line TWXL1.5-4A

Batch grooving for 1.5-4 inch pipes

5 units grooving production line TWXL2-8A

Batch grooving for 2-8 inch pipes 

Single unit grooving production line TWXL1.5-12A

Automatic grooving for 3-8 inch pipes

PRODUCTOS RELACIONADOS

Consulta ahora

Enviar